Current Position:Home >>PRODUCTS >>Auxiliary Equipment

Flyash Dryer

【Production Capacity】:
10 t/h
【Motor Power】:
5.5*2 KW
【Product Overview】:
  About the Flyash Dryer: The flyash drying machine is novel and leading in structure and t
【Main Features】:
No need for wheel gear in large and small size,long life
【Quality Assurance】:
CE,ISO9001,BV

 

About the Flyash Dryer:

The flyash drying machine is novel and leading in structure and technology respectively.It is generally employed for the drying of clay ,slag ,coal ,flyash ,ore in the construction and chemical industries.
The main body of the flyash dryer is constituted of three concentric circles which are of different diameter ,and horizontal rolling by the belts.The fuel ,gas and coal airheater is installed in the the feed inlet , the discharge end is fed with dust cover and automatic baiting device .Via pipeline ,the dust cove is connected with dust remover ,and the dust catching machine ,feeding equipment ,conveyor can specilally designed according to customers 'requirements .


The Characteristics & Features of The Flyash Dryer :

1. Excellent heat preservation ,the thermal efficiency can reach above 80%,increased by 45%(The heat efficiency of traditional dryers is merely confined to 35% ).
2. Compared with single drum roasting machine ,It's land consumption and electricity consumption were economized 50% and 60% respectively .
3. Coal ,Gas ,oil all can act as fuel , granular and powder materials that smaller than 20mm are also applied to the drying machine .
4. The moisture of finished products can be controlled under 0.5%,is the indispensable equipment for flyash and ore powder production line .
5. Adopted alloy steel plate with abrasive resistance 4 times than common steel plate .
6. The eventually moisture indexes can be adjusted on the ground of consumers'needs .
7.  No need for wheel gear in large and small size ,only pull wheel is required.
8. The Roasting equipment is of long life .

Brief Working Process of the Flyash Dryer (Telescope-feed 3 Drum Dryer) as Follows:
The flyash is conveyed to the drying machine through feed inlet ,then lifted from the inner tube to themiddle tube ,finally to the outer tube ,and finished in the tube of discharge end .

The Main Technical Parameters of Flyash Roasting Machine  :

del
Spe. 2.0*6m
Spec. 2.5*6.5m
Spe. 3.0*7m
Spe. 3.2*7m
Rotary diameter(m)
2.0
2.5
3.0
3.2
Rotary length(m)
6
6.5
7
7
Ratary cubage (m3)
18.84
31.89
50.26
56.30
Rotational speed (r/pm)
4-6.5
4-6.5
4-6.5
4-6.5
The moisture of Cinder ( %)
20
The moisture of finished cinder (%)
1-3
The Moisture Coal ash  (%)
20
 The moisture of finished Coal ash  (%)
1-3
Inlet Temperature C Celcius (Max.)
700-750
700-750
700-750
700-750
Capacity (t/h)
Flyash10-15
Flyash15-20
Flyash25-35
Flyash35-45
Cinder22-25
Cinder30-35
Cinder40-50
Cinder55-65
Coal consumption
KG/H 17-24
KG/H 17-20
KG/H 17-20
KG/H 17-20
Model Type
Y2-160m-4E
Y2-132m-4E
Y2-132m-4E
Y2-160m-4
Motor Power KW
5.5×2
7.5×2
7.5×4
11×4
Reducer Model
XWD-5.5KW-8
XWD-5.5KW-5
XWD-7.5KW-8
XWD-7.5KW-8
Reducer Rate
29
29
29
29

 

Note: If you want to know more about our products , To send questions and get more infomation.

Name: *
E-mail:*
Tel:
Country:
Message:*