Current Position:Home >>TECHNOLOGY

Corn stalk wood rod briquetting machine in India

Corn stalk wood rod briquetting machine in India

Corn is used for the main feed grain, classics, forage crops, corn straw is also the industry and agriculture production an important production resources. As a kind of corn stalk, corn stalk is rich in nutrition and can use chemical composition, can be used as raw material of feed of animal husbandry. For a long time, corn stalk is one of the main raw materials for livestock feed.

The test results showed that the corn straw contained 30% carbohydrate, 2% - 4% protein and 0.5% - 1% fat, which can be directly fed. In terms of herbivores, 2 kg of corn stalk increased weight net energy equivalent to 1 kg of maize grain, especially after silage, ammonification, ammoniation and saccharification processing, can improve the utilization rate, benefit to fight more considerable. According to the research analysis, the digestive energy contained in the corn stalk is 2 235.8kJ/kg, and the nutrition is rich, the total energy and the grass is very. Of corn straw for fine processing, made into a highly nutritious animal feed, not only conducive to the development of animal husbandry and feed stalk by, more good ecological benefits and economic benefits.

Corn stalk wood rod briquetting machine

Main technical parameters of the corn stalk straw rod briquetting machine:

Density: 1400 - 700 kg/m3;

Ash: 1 - 20%; 

Water content: less than or equal to 15%;

Calorific value: 3700 - 4500 kcal/kg;

 

The calorific value of straw briquette fuel block is different with different kinds of straw. Taking corn straw as an example: the calorific value of coal is 0.7 - 0.8 times, that is, the 1.25t of corn straw briquette fuel block is equivalent to 1t coal, and its combustion efficiency is 1.3 - 1.5 times. Therefore, the utilization rate of 1 t corn straw briquette fuel is very hot.

 

Successful Briquetting Plant Process:

Corn stalk wood rod briquetting machine

Precautions for the use of straw stick machine:

1, please read the instructions carefully before use, and in strict accordance with the operating rules and sequence of operation.

2, material forming granularity requirements: the raw material must be processed in 3-50mm to avoid boring machine.

3, forming machine of water requirements: corn stalk, wheat straw, rice straw moisture content between 10% - 30% can be molded, to 15% - 20% between the best. Peanut hull, sawdust water content is between 12 -20%%, forming the best effect.

4, in the case of zero temperature or moisture in the winter, open the heating ring can be normal production.

Suitable Agriculture Wastes: soyabean husk, palm husk, sunflower stalk, wheat straw, paddy straw, bamboo dust, caster seed shells / stalk, cotton stalks, groundnut shell, sugarcane baggasse, mustard stalks, jute sticks, coir pitch, coffee husk, rice husk.

Corn stalk wood rod briquetting machine

Note: If you want to know more about our products , To send questions and get more infomation.

Name: *
E-mail:*
Tel:
Country:
Message:*